Operation Manual

Vigor2832 Series User’s Guide
180
To use Advance Mode, do the following steps:
1. Click the Advance Mode radio button.
2. Click Index 2 to access into the following page.
Available settings are explained as follows:
Item Description
Enable Check this box to enable this policy.
Comment Type a brief explanation for such profile.
Protocol Use the drop-down menu to choose a proper protocol for the
WAN interface.
Source IP Any – Any IP can be treated as the source IP.
Src IP Start - Type the source IP start for the specified WAN
interface.
Src IP End - Type the source IP end for the specified WAN
interface. If this field is blank, it means that all the source