Operation Manual

Vigor2832 Series User’s Guide
156
Available settings are explained as follows:
Item Description
Enable Check to enable internal RADIUS client feature.
Authentication Port Set a port number for internal RADIUS server.
RADIUS Client Access List Allow to configure that clients under specified domain (IPv4
and IPv6) must be authenticated with the specified shared
secret.
Enable - Check to enable RADIUS client feature.
Shared Secret - The RADIUS server and client share a secret
that is used to authenticate the messages sent between
them. Both sides must be configured to use the same shared
secret. The maximum length of the shared secret you can set
is 36 characters.
IP Address – Type the IP addres of the wired/wireless
client.
IP Mask – Type the subnet mask required for the IP address.
IPv6 Address – Type the IPv6 address of the wired/wireless
client.
IPv6 Length - Type the prefix length required for the IPv6
address.
User Profile During the process of security authentication, user account
and user password will be required for identity
authentication. Before configuring such page, create at least
one user profile in User Management>>User Profile first.
Select All – Click it to select all of the user profiles in
Available List.