Operation Manual

Vigor2832 Series User’s Guide
153
Comment Display the name of the time schedule.
Time Display the valid time period by time bar.
Days in a week Display which day(s) will be always on and which day(s) will
be always off of the schedule profile by color boxes.
- If it lights in green, it means such schedule is active.
You can set up to 15 schedules. Then you can apply them to your Internet Access or VPN and
Remote Access >> LAN-to-LAN settings.
To add a schedule:
1. Click any index, say Index No. 1.
2. The detailed settings of the call schedule with index 1 are shown below.
Available settings are explained as follows:
Item Description
Enable Schedule
Setup
Check to enable the schedule.
Start Date
(yyyy-mm-dd)
Specify the starting date of the schedule.
Start Time (hh:mm) Specify the starting time of the schedule.
Duration Time
(hh:mm)
Specify the duration (or period) for the schedule.
Action Specify which action Call Schedule should apply during the
period of the schedule.
Force On -Force the connection to be always on.
Force Down -Force the connection to be always down.
Enable Dial-On-Demand -Specify the connection to be
dial-on-demand and the value of idle timeout should be
specified in Idle Timeout field.
Disable Dial-On-Demand -Specify the connection to be up
when it has traffic on the line. Once there is no traffic over
idle timeout, the connection will be down and never up again
during the schedule.
Idle Timeout Specify the duration (or period) for the schedule.
How often -Specify how often the schedule will be applied
Once -The schedule will be applied just once