Operation Manual

Vigor2832 Series User’s Guide
4
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
Wireless LAN
ON/OFF/WPS
WLAN On - Press the button and release it within 2 seconds. When the
wireless function is ready, the green LED will be on.
WLAN Off - Press the button and release it within 2 seconds to turn off
the WLAN function. When the wireless function is not ready, the LED
will be off.
WPS - When WPS function is enabled by web user interface, press this
button for more than 2 seconds to wait for client’s device making
network connection through WPS.
DSL Connecter for accessing the Internet through ADSL2/2+.
LAN1~LAN4 Connectors for local networked devices.
WAN2 Connector for remote networked devices.
USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).
PWR Connector for a power cord.
ON/OFF
Power Switch.