Operation Manual

Vigor2832 Series User’s Guide
91
WAN links for Channel 5, 6 and 7 are provided for router-borne application such as TR-069.
The settings must be applied and obtained from your ISP. For your special request, please
contact with your ISP and then click WAN link of Channel 5, 6 or 7 to configure your router.
Available settings are explained as follows:
Item Description
Multi-VLAN Channel 5/6/7 Enable – Click it to enable the configuration of this channel.
Disable –Click it to disable the configuration of this channel.
WAN Type The connections and interfaces created in every channel may
select a specific WAN type to be built upon. In the Multi-PVC
application, only the Ethernet WAN type is available. The
user will be able to select the physical WAN interface the
channel shall use here.
General Settings VPI - Type in the value provided by your ISP.
VCI - Type in the value provided by your ISP.
Protocol - Select a proper protocol for this channel.
Encapsulation - Choose a proper type for this channel. The
types will be different according to the protocol setting that
you choose.
Add VLAN Header – Check the box to enable the following