User`s guide

Vigor2820 Series User’s Guide
80
3
3
.
.
3
3
.
.
4
4
A
A
d
d
d
d
r
r
e
e
s
s
s
s
M
M
a
a
p
p
p
p
i
i
n
n
g
g
This page is used to map specific private IP to specific WAN IP alias.
If you have "a group of IP Addresses" and want to apply to the router, please use WAN IP
alias function to record these IPs first. Then, use address mapping function to map specific
private IP to specific WAN IP alias.
For example, you have IP addresses ranging from 86.123.123.1 ~ 86.123.123.8. However,
your router uses 86.123.123.1, and the rest of the IPs are recorded in WAN IP alias. You want
that private IP 192.168.1.10 can use 86.123.123.2 as source IP when it sends packet out to
Internet. You can use address mapping function to achieve this demand. Simply type
192.168.1.10 as the Private IP; and type 86.123.123.2 as the WAN IP.
Protocol Display the protocol used for this address mapping.
Public IP Display the public IP address selected for this entry, e.g.,
86.123.123.2.
Private IP Display the private IP set for this address mapping, e.g.,
192.168.1.10
Mask Display the subnet mask selected fro this address mapping.
Status Display the status for the entry, enable or disable.
Click the index number link to open the configuration page.