User`s guide

Vigor2820 Series User’s Guide

Dest Port Start Displays the IP address for the start of the destination port.

Dest Port End Displays the IP address for the end of the destination port.

Move UP/Move Down Use Up or Down link to move the order of the policy.

Click Index 1 to access into the following page for configuring load-balance policy.

Enable Check this box to enable this policy.

Protocol Use the drop-down menu to choose a proper protocol for the WAN

interface.

Binding WAN

interface

Choose the WAN interface (WAN1 or WAN2) for binding.

Auto failover to other WAN – Check this button to lead the data

passing through other WAN automatically when the selected

WAN interface is failover.

Src IP Start Type the source IP start for the specified WAN interface.

Src IP End Type the source IP end for the specified WAN interface. If this field

is blank, it means that all the source IPs inside the LAN will be

passed through the WAN interface.

Dest IP Start Type the destination IP start for the specified WAN interface.

Dest IP End Type the destination IP end for the specified WAN interface. If this

field is blank, it means that all the destination IPs will be passed

through the WAN interface.

Dest Port Start Type the destination port start for the destination IP.