User`s guide

Vigor2820 Series User’s Guide
55
P
P
P
P
P
P
f
f
o
o
r
r
W
W
A
A
N
N
2
2
Such mode is active only 3G USB Modem was chosen as the physical mode in General Setup.
PPP Client Mode Click Enable to activate this mode for WAN2.
SIM PIN code Type PIN code of the SIM card that will be used to access Internet.
Modem Initial String Such value is used to initialize USB modem. Please use the default
value. If you have any question, please contact to your ISP.
APN Name APN(Access Point Name) is provided by your ISP for identifying
different access points. Simply click Apply to apply such name.
Finally, you have to click OK to save the setting.
Apply – Activate the function of identification.
Modem Dial String Such value is used to dial through USB mode. Please use the default
value. If you have any question, please contact to your ISP.
PPP Username Type the PPP username (optional).
PPP Password Type the PPP password (optional).
Index (1-15) Set the PCs on LAN to work at certain time interval
only. You may choose up to 4 schedules out of the 15 schedules
pre-defined in Applications >> Schedule setup. The default setting
of this filed is blank and the function will always work.