User`s guide

Vigor2820 Series User’s Guide
47
you are using. Notice that this setting is available for WAN1 only.
Type the additional WAN IP address and check the Enable box.
Then click OK to exit the dialog.
IP Address – Type in the private IP address.
Subnet Mask – Type in the subnet mask.
Gateway IP Address – Type in gateway IP address.
Default MAC Address Type in MAC address for the router. You
can use Default MAC Address or specify another MAC address for
your necessity.
MAC Address – Type in the MAC address for the router manually.
DNS Server IP
Address
Type in the primary IP address for the router. If necessary, type in
secondary IP address for necessity in the future.
After finishing all the settings here, please click OK to activate them.