User`s guide

Vigor2820 Series User’s Guide
230
3
3
.
.
1
1
5
5
.
.
6
6
S
S
y
y
s
s
l
l
o
o
g
g
/
/
M
M
a
a
i
i
l
l
A
A
l
l
e
e
r
r
t
t
SysLog function is provided for users to monitor router. There is no bother to directly get into
the Web Configurator of the router or borrow debug equipments.
Enable Check “Enable” to activate function of syslog.
Syslog Save to Check Syslog Server to save the log to Syslog directly.
Check USB Disk to save the log to the attached USB
diskette.
Router Name Type in the router name provided by ISP.
Server IP Address The IP address of the Syslog server.
Destination Port Assign a port for the Syslog protocol.
Enable syslog message Check the box listed on this web page to send the
corresponding message of firewall, VPN, User Access,
Call, WAN, Router/DSL information to Syslog.
Enable (Mail Alert Setup) Check “Enable” to activate function of mail alert.
Send a test e-mail Make a simple test for the e-mail address specified in this
page. Please assign the mail address first and click this
button to execute a test for verify the mail address is
available or not.
SMTP Server The IP address of the SMTP server.
Mail To Assign a mail address for sending mails out.
Return-Path Assign an e-mail address of another mailbox to accept all
returned messages if fatal problems occur at the recipient
mailbox.
The e-mail address typed here also acts as the Sender
address while Vigor sends out the alert e-mails.
Authentication Check this box to activate this function while using e-mail
application.