User`s guide

Vigor2820 Series User’s Guide
209
3
3
.
.
1
1
3
3
.
.
4
4
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
In the Access Control, the router may restrict wireless access to certain wireless clients only
by locking their MAC address into a black or white list. The user may block wireless clients
by inserting their MAC addresses into a black list, or only let them be able to connect by
inserting their MAC addresses into a white list. In the Access Control web page, users may
configure the white/black list modes used by each SSID and the MAC addresses applied to
their lists.
Enable Mac Access Filter Select the access control filter type to be applied to
wireless LAN identified with SSID 1 to 4 respectively.
MAC Address Filter Display all access control entries that were inserted before.
Client’s MAC Address
Manually enter the MAC address of wireless client.
Apply SSID After entering the client’s MAC address, check the box of
the SSIDs desired to insert this MAC address into their
access control list.
Attribute s: Isolate the station from LAN - select to isolate the
wireless client from the wired LAN network.
Add Add a new access control entry into the list.
Delete Delete the selected access control entry in the list.
Edit Edit the selected access control entry in the list.
Cancel Give up current modified settings.
OK Click it to save the settings in access control list.
Clear All Clean all entries in the MAC address list.