User`s guide

Vigor2820 Series User’s Guide
197
3
3
.
.
1
1
2
2
.
.
3
3
D
D
i
i
a
a
l
l
t
t
o
o
S
S
i
i
n
n
g
g
l
l
e
e
/
/
D
D
u
u
a
a
l
l
I
I
S
S
P
P
s
s
Select Dialing to a Single ISP if you access the Internet via a single ISP.
ISP Access Setup ISP Name - Enter your ISP name such as Seednet, Hinet and so
on.
Dial Number -Enter the ISDN access number provided by your
ISP.
Username - Enter the username provided by your ISP.
Password - Enter the password provided by your ISP.
Require ISP Callback (CBCP) -If your ISP supports the
callback function, check this box to activate the Callback
Control Protocol during the PPP negotiation.
Scheduler (1-15) - Enter the index of schedule profiles to
control the Internet access according to the preconfigured
schedules. Refer to section 3.8.2 Schedule for detailed
configuration.
PPP/MP Setup
Link Type – There are three link types provided here for
different purpose. Link Disable disables the ISDN dial-out
function. Dialup 64Kbps allows you to use one ISDN B
channel for Internet access. Dialup 128Kbps allows you to use
both ISDN B channels for Internet access. Dialup BOD (for
detailed information of configuration, please refer to section
3.12.4) stands for bandwidth-on-demand. The router will use
only one B channel in low traffic situations. Once the single B
channel bandwidth is fully used, the other B channel will be
activated automatically through the dialup. For more detailed
BOD parameter settings, please refer to the section of Call
Control.
PPP Authentication - PAP only allows you to configure the
PPP session to use the PAP protocol to negotiate the username
and password with the ISP. PAP or CHAP is to configure the
PPP session to use the PAP or CHAP protocols to negotiate the
username and password with the ISP.
Idle Timeout - Idle timeout means the router will be disconnect
after being idle for a preset amount of time. The default is 180
seconds. If you set the time to 0, the ISDN connection to the
ISP will always remain on.