User`s guide

Vigor2820 Series User’s Guide
172
Account Name Display the account name of SIP address before @.
Ring Port Specify which port will ring when receiving a phone call. Set
Phone, ISDN1-S0 or ISDN-TE as the default ring port for the
SIP account. If you choose Phone or ISDN1-S0, the ISDN2-TE
selection will be dimmed, vice versa. There are ten internal
lines with numbers (30 – 39) offered for ISDN-S0. You can
specify any one of them as ring port for specified SIP account.
By the way, ISDN-S0 can be used by mapping with MSN
numbers.
STUN Server Type in the IP address or domain of the STUN server.
External IP Type in the gateway IP address.
SIP PING interval The default value is 150 (sec). It is useful for a Nortel server
NAT Traversal Support.
Status Show the status for the corresponding SIP account. R means
such account is registered on SIP server successfully. – means
the account is failed to register on SIP server.
Profile Name Assign a name for this profile for identifying. You can type
similar name with the domain. For example, if the domain name
is draytel.org, then you might set draytel-1 in this field.
Register via If you want to make VoIP call without register personal
information, please choose None and check the box to achieve
the goal. Some SIP server allows user to use VoIP function
without registering. For such server, please check the box of
Call without Registration. Choosing Auto is recommended.