User`s guide

Vigor2820 Series User’s Guide
122
Enable Click this button to activate the function of limit bandwidth.
Apply to 2
nd
Subnet – Check this box to apply the bandwidth
limit to the second subnet specified in LAN>>General Setup.
Disable Click this button to close the function of limit bandwidth.
Default TX limit Define the default speed of the upstream for each computer in
LAN.
Default RX limit Define the default speed of the downstream for each computer
in LAN.
Allow auto adjustment to
make the best utilization
of available bandwidth
Router will detect if there is enough bandwidth remained for
using according to the bandwidth limit set by the user. If yes,
the router will adjust the available bandwidth for users to
enhance the total utilization.
Limitation List Display a list of specific limitations that you set on this web
page.
Start IP Bandwidth limit can be applied on certain IP range. That’s, only
the PCs within the range will be influenced by the bandwidth
limitation set here. Please define the start IP address for the
specific limitation.
End IP Define the end IP address for the specific limitation.
Each /Shared Select Each to make each IP within the range of Start IP and
End IP having the same speed defined in TX limit and RX limit
fields; select Shared to make all the IPs within the range of
Start IP and End IP share the speed defined in TX limit and RX
limit fields.
TX limit Define the limitation for the speed of the upstream to be applied
as specific limitation. If you do not set the limit in this field, the
system will use the default speed for the specific limitation you
set for each index.
RX limit Define the limitation for the speed of the downstream to be
applied as specific limitation.. If you do not set the limit in this
field, the system will use the default speed for the specific
limitation you set for each index.
Add Add the specific speed limitation onto the list above.
Edit Allows you to edit the settings for the selected limitation.
Delete Remove the selected settings existing on the limitation list.
Index (1-15) in Schedule
Setup
You can type in four sets of time schedule for your request.
All the schedules can be set previously in Application –
Schedule web page and you can use the number that you have
set in that web page.