User`s guide

Vigor2820 Series User’s Guide
118
content filter profile.
Setup Test Server
It is recommended for you to use the default setting,
auto-selected.
Find more
Click it to open http://myvigor.draytek.com for searching
another qualified and suitable server.
Set to Factory Default
Click this link to retrieve the factory settings.
Cache
None – the router will check the URL that the user wants to
access via WCF precisely, however, the processing rate is
normal. Such item can provide the most accurate URL
matching.
L1 – the router will check the URL that the user wants to access
via WCF. If the URL has been accessed previously, it will be
stored for a short time (about 1 second) in the router to be
accessed quickly if required. Such item can provide accurate
URL matching with faster rate.
L2 – the router will check the URL that the user wants to access
via WCF. If the data has been accessed previously, the IP
addresses of source and destination IDs will be memorized for a
short time (about 1 second) in the router. When the user tries to
access the same destination ID, the router will check it by
comparing the record stored. If it matches, the page will be
retrieved quickly. Such item can provide URL matching with
the fastest rate.
L1+L2 Cache – the router will check the URL with fast
processing rate combining the feature of L1 and L2.
Eight profiles are provided here as Web content filters. Simply click the index number under
Profile to open the following web page. The items listed in Categories will be changed
according to the different service providers. If you have and activate another web content filter
license, the items will be changed simultaneously. All of the configuration made for web
content filter will be deleted automatically. Therefore, please backup your data before you
change the web content filter license.