User`s guide

Vigor2800 Series User’s Guide

PPP Client Mode - Click Enable to activate this mode for backup.

SIM PIN code - Type PIN code of the SIM card that will be used

to access Internet.

Modem Initial String - Such value is used to initialize USB

modem. Please use the default value. If you have any question,

please contact to your ISP.

Modem Dial String - Such value is used to dial through USB

mode. Please use the default value. If you have any question,

please contact to your ISP.

PPP Username - Type the PPP username (optional).

PPP Password - Type the PPP password (optional).

Index (1-15) - Set the PCs on LAN to work at certain time interval

only. You may choose up to 4 schedules out of the 15 schedules

pre-defined in Applications >> Schedule setup. The default

setting of this filed is blank and the function will always work.

RIP Protocol Routing Information Protocol is abbreviated as RIP（RFC1058）

specifying how routers exchange routing tables information. Click

Enable RIP for activating this function.

Bridge Mode If you choose Bridged IP as the protocol, you can check this box

to invoke the function. The router will work as a bridge modem.

WAN IP Network

Settings

This group allows you to obtain an IP address automatically and

allows you type in IP address manually.

Obtain an IP address automatically – Click this button to obtain

the IP address automatically.

Router Name – Type in the router name provided by ISP.

Domain Name – Type in the domain name that you have assigned.

WAN IP Alias - If you have multiple public IP addresses and

would like to utilize them on the WAN interface, please use WAN

IP Alias. You can set up to 8 public IP addresses other than the

current one you are using.