User`s guide

Vigor2800 Series User’s Guide

PPPoE/PPPoA Client Click Enable for activating this function. If you click Disable, this

function will be closed and all the settings that you adjusted in this

page will be invalid.

DSL Modem Settings Set up the DSL parameters required by your ISP. These are vital

for building DSL connection to your ISP.

Multi-PVC channel – The selections displayed here are

determined by the page of Internet Access – Multi PVCs. Select

M-PVCs Channel means no selection will be chosen.

VPI - Type in the value provided by ISP.

VCI - Type in the value provided by ISP.

Encapsulating Type - Drop down the list to choose the type

provided by ISP.

Protocol - Drop down the list to choose the one provided by ISP.

If you have already used Quick Start Wizard to set the protocol,

then it is not necessary for you to change any settings in this group.

PPPoE Pass-through The router offers PPPoE dial-up connection. Besides, you also can

establish the PPPoE connection directly from local clients to your

ISP via the Vigor router.

For Wired LAN – If you check this box, PCs on the same network

can use another set of PPPoE session (different with the Host PC)

to access into Internet.

For Wireless LAN - If you check this box, PCs connecting to this

router through wireless LAN can use another set of PPPoE session

(different with the Host PC) to access into Internet.

3G USB Modem Backup - To use 3G USB Modem as the Internet

backup.