Operation Manual

Vigor2760 Series User’s Guide
82
To use Static or Dynamic IP as the accessing protocol of the Internet, select Static or
Dynamic IP from the WAN>>Internet Access >>WAN1 page. The following web page will
appear.
Available settings are explained as follows:
Item Description
Enable/Disable
Click Enable for activating this function. If you click
Disable, this function will be closed and all the settings that
you adjusted in this page will be invalid.
WAN Connection
Detection
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode – Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
TTL value is set by telnet command.
RIP Protocol
Routing Information Protocol is abbreviated as RIP
（RFC1058）specifying how routers exchange routing
tables information. Click Enable RIP for activating this
function.
Bridge Mode
If you choose Bridged IP as the protocol, you can check
this box to invoke the function. The router will work as a
bridge modem.