Operation Manual

Vigor2760 Series User’s Guide
184
Source/Destination
IP
To set the IP address manually, please choose Any
Address/Single Address/Range Address/Subnet Address
as the Address Type and type them in this dialog.
Protocol
Specify the protocol(s) which this filter rule will apply to.
Source Port /
Destination Port
(=) – when the first and last value are the same, it indicates
one port; when the first and last values are different, it
indicates a range for the port and available for this service
type.
(!=) – when the first and last value are the same, it indicates
all the ports except the port defined here; when the first and
last values are different, it indicates that all the ports except
the range defined here are available for this service type.
(>) – the port number greater than this value is available.
(<) – the port number less than this value is available for
this profile.
3. Click Next to get the following page.
Available settings are explained as follows:
Item Description
Pass Immediately
Packets matching the rule will be passed immediately.
APP Enforcement - Select an APP Enforcement profile
for global IM/P2P application blocking. If there is no
profile for you to select, please choose [Create New] from
the drop down list in this page to create a new profile. All
the hosts in LAN must follow the standard configured in the
APP Enforcement profile selected here. For detailed
information, refer to the section of APP Enforcement
profile setup. For troubleshooting needs, you can specify to
record information for IM/P2P by checking the Log box. It
will be sent to Syslog server. Please refer to section
Syslog/Mail Alert for more detailed information.
URL Content Filter - Select one of the URL Content
Filter profile settings (created in CSM>> URL Content
Filter) for applying with this router. Please set at least one
profile for choosing in CSM>> URL Content Filter web
page first. Or choose [Create New] from the drop down list