Operation Manual

Vigor2760 Series User’s Guide
157
IP Subnet – Define a subnet containing IP address and
mask address.
 Network – Type an IP address here.
 Mask – Use the drop down list to choose a suitable
mask for the network.
IP Object / IP Group– Use the drop down list to choose a
preconfigured IP object/group.
Destination IP
Any – Any IP can be treated as the destination IP.
IP Range – Define a range of IP address as destination IP
addresses.
 Start - Type an address as the starting IP for such
profile.
 End - Type an address as the ending IP for such profile.
IP Subnet – Define a subnet containing IP address and
mask address.
 Network – Type an IP address here.
 Mask – Use the drop down list to choose a suitable
mask for the network.
IP Object / IP Group– Use the drop down list to choose a
preconfigured IP object/group.
Destination Port
Any – Any port number can be treated as the destination
port.
Dest Port Range –
 Start - Type the destination port start for the destination
IP.
 End - Type the destination port end for the destination
IP. If this field is blank, it means that all the destination
ports will be passed through the WAN interface.
Send via if criteria
matched
Interface – Use the drop down list to choose a WAN or
LAN interface or VPN profile. Packets match with the
above criteria will be transferred to the interface chosen
here.
Gateway – Specific gateway is used only when you want
to forward the packets to the desired gateway. Usually,
Default Gateway is selected in default.
Packet Forwarding to WAN via – When you choose
WAN (e.g., WAN1) as the Interface for packet
transmission, you have to specify the way the packet
forwarded to. Choose Force NAT or Force Routing.
Failover to
Check this button to lead the data passing through specific
interface (WAN/LAN/VPN/Route Policy) automatically
when the selected interface (defined in Send via if criteria
matched) is down.
 WAN/LAN – Use the drop down list to choose an
interface as an auto failover interface.
 VPN – Use the drop down list to choose a VPN tunnel
as a failover tunnel.
 Route Policy – Use the drop down list to choose an