Operation Manual

Vigor2760 Series User’s Guide
152
Set to Factory Default
Clear all of the settings and return to factory default
settings.
Viewing IPv6 Routing
Table
Displays the routing table for your reference.
Click any underline of index number to get the following page.
Available settings are explained as follows:
Item Description
Enable
Click it to enable this profile.
Destination IPv6 Address
/ Prefix Len
Type the IP address with the prefix length for this entry.
Gateway IPv6 Address
Type the gateway address for this entry.
Network Interface
Use the drop down list to specify an interface for this static
route.
When you finish the configuration, please click OK to save and exit this page