Operation Manual

Vigor2760 Series User’s Guide
122
Click any index (7~8) to get the following web page:
Available settings are explained as follows:
Item Description
Multi-PVC/VLAN
Channel 7/8
Enable – Select to enable this channel.
Disable – Select to disable this channel.
WAN Type
The connections and interfaces created in every channel
may select a specific WAN type to be built upon. In the
Multi-PVC application, only the Ethernet WAN type is
available. The user will be able to select the physical WAN
interface the channel shall use here.
General Settings
VPI - (Available when WAN Type is ADSL) Virtual Path
Identifier. Contact your ISP or carrier for the appropriate
value.
VCI - (Available when WAN Type is ADSL) Virtual
Channel Identifier. Contact your ISP or carrier for the
appropriate value.
Protocol - (Available when WAN Type is ADSL) Access
protocol used for the ADSL connection. Contact your ISP
or carrier for the appropriate setting.
 PPPoA: Point-to-Point over ATM.
 PPPoE: Point-to-Point over Ethernet.