Operation Manual

Vigor2760 Series User’s Guide
121
authentication.
Password – Password provided by the ISP for
PPPoE/PPPoA authentication.
PPP Authentication –The protocol used for PPP
authentication.
 PAP only- Only PAP (Password Authentication
Protocol) is used.
 PAP or CHAP- Both PAP and CHAP
(Challenge-Handshake Authentication Protocol) can
be used for PPP authentication. Router negotiates with
the PPTP or L2TP server to determine which protocol
to use.
Always On – If selected, the router will maintain the
PPPoE/PPPoA connection.
Idle Timeout – Maximum length of time, in seconds, of
idling allowed (no traffic) before the connection is dropped.
ISP Address from ISP - Specifies how the WAN IP
address of the channel configured.
 Fixed IP
Yes - IP address entered in the Fixed IP Address field
will be used as the IP address of the virtual WAN.
No - Virtual WAN IP address will be assigned by the
ISP’s PPPoE/PPPoA server.
MPoA
Obtain an IP address automatically – Select this option if
the router is to receive IP configuration information from a
DHCP server.
 Router Name – Sets the value of DHCP Option 12,
which is used by some ISPs.
 Domain Name – Sets the value of DHCP Option 15,
which is used by some ISPs.
Specify an IP address – Select this option to manually
enter the IP address.
 IP Address – Type in the IP address.
 Subnet Mask – Type in the subnet mask.
 Gateway IP Address – Type in gateway IP address.
DNS Server IP Address - Type in the primary IP address
for the router if you want to use Static IP mode. If
necessary, type in secondary IP address for necessity in the
future.
After finished the above settings, click OK to save the settings and return to previous page.