Operation Manual

Vigor2760 Series User’s Guide
99
DNS Server IP Address
Type in the primary IP address for the router if you want to
use Static IP mode. If necessary, type in secondary IP
address for necessity in the future.
After finishing all the settings here, please click OK to activate them.
D
D
e
e
t
t
a
a
i
i
l
l
s
s
P
P
a
a
g
g
e
e
f
f
o
o
r
r
P
P
P
P
T
T
P
P
i
i
n
n
W
W
A
A
N
N
2
2
To use PPTP as the accessing protocol of the internet, please click the PPTP tab. The
following web page will be shown.
Available settings are explained as follows:
Item Description
PPTP
Enable - Click this radio button to enable a PPTP client to
establish a tunnel to a DSL modem on the WAN interface.
Disable – Click this radio button to close the connection
through PPTP.
Server Address - Specify the IP address of the PPTP server
if you enable PPTP/L2TP client mode.
Specify Gateway IP Address – Specify the gateway IP
address for DHCP server.
ISP Access Setup
Username -Type in the username provided by ISP in this
field. The maximum length of the user name you can set is
63 characters.
Password -Type in the password provided by ISP in this
field. The maximum length of the password you can set is
62 characters.
Index (1-15) in Schedule Setup - You can type in four sets
of time schedule for your request. All the schedules can be
set previously in Application >> Schedule web page and