Operation Manual

Vigor2760 Series User’s Guide

Available settings are explained as follows:

Item Description

Enable / Disable

Click Enable for activating this function. If you click

Disable, this function will be closed and all the settings that

you adjusted in this page will be invalid.

Keep WAN Connection

Normally, this function is designed for Dynamic IP

environments because some ISPs will drop connections if

there is no traffic within certain periods of time. Check

Enable PING to keep alive box to activate this function.

PING to the IP - If you enable the PING function, please

specify the IP address for the system to PING it for keeping

alive.

PING Interval - Enter the interval for the system to

execute the PING operation.

WAN Connection

Detection

Such function allows you to verify whether network

connection is alive or not through ARP Detect or Ping

Detect.

Mode – Choose ARP Detect, Ping Detect or Always On

for the system to execute for WAN detection. If you choose

Ping Detect as the detection mode, you have to type

required settings for the following items.

 Primary/Secondary Ping IP – If you choose Ping