Network Router User Manual
Table Of Contents
- Table of Contents
- 1. Preface
- 2. Configuring Basic Settings
- 3. User Mode Operation
- 4. Admin Mode Operation
- 5. Application and Examples
- 6. Trouble Shooting
- 6.1 Checking If the Hardware Status Is OK or Not
- 6.2 Checking If the Network Connection Settings on Your
- 6.3 Pinging the Router from Your Computer
- 6.4 Checking If the ISP Settings are OK or Not
- 6.5 Forcing Vigor Router into TFTP Mode for Performing the
- 6.6 Backing to Factory Default Setting If Neces
- 6.7 Contacting Your Dealer
Vigor2750 Series User’s Guide
69
Rx Packets Display the counting number of the packet received.
Rx Octets Display the total received bytes.
Rx Unicast Display the counting number of the received unicast packet.
Rx Broadcast Display the counting number of the received broadcast packet.
Rx Pause Display the counting number of the received pause packet.
RX 64 Bytes Display the number of 64-byte frames in good and bad packets
received.
RX 65-127 Bytes Display the number of 65 ~ 127-byte frames in good and bad
packets received.
RX 128-255 Bytes Display the number of 128 ~ 255-byte frames in good and bad
packets received.
RX 256-511 Bytes Display the number of 256 ~ 511-byte frames in good and bad
packets received.
RX 512-1023 Bytes Display the number of 512 ~ 1023-byte frames in good and bad
packets received.
RX 1024- 1526 Bytes Display the number of 1024-1522-byte frames in good and bad
packets received.
RX 1527 Bytes Display the number of 1527-byte frames in good and bad
packets received.