Network Router User Manual
Table Of Contents
- Table of Contents
- 1. Preface
- 2. Configuring Basic Settings
- 3. User Mode Operation
- 4. Admin Mode Operation
- 5. Application and Examples
- 6. Trouble Shooting
- 6.1 Checking If the Hardware Status Is OK or Not
- 6.2 Checking If the Network Connection Settings on Your
- 6.3 Pinging the Router from Your Computer
- 6.4 Checking If the ISP Settings are OK or Not
- 6.5 Forcing Vigor Router into TFTP Mode for Performing the
- 6.6 Backing to Factory Default Setting If Neces
- 6.7 Contacting Your Dealer
Vigor2750 Series User’s Guide
169
z If you choose DSCP as QCE Type, you have to type value for it and specify traffic class
from Low, Normal, Medium and High.
z If you choose ToS as QCE Type, you have to specify priority class from Low, Normal,
Medium and High.
z If you choose Tag Priority as QCE Type, you have to specify priority class from Low,
Normal, Medium and High.