Quick Start Guide

If you selected DHCP,
this screen will appear.
If your ISP uses PPPoE
(Point-to-Point Protocol over
Ethernet),then select PPPoE. Once
PPPoE is selected, you will see this
screen. Enter the username and
password provided by your ISP.
If Static IP is selected, then this
screen will appear. Enter the IP
address information originally
provided by your ISP.
Then click Next and go to Setp 4.
a. DHCP
b. PPPoE
c. Static IP
Then click Next and go to Setp 4.
Then click Next and go to Setp 4.
05
VIGOROUS BROADBAND ACCESS