Quick Start Guide

Cable modem/
ADSL modem
Internet
1.Connect the Vigor2200E-plus Broadband Router to Your Network
Connect one port of 4-port switch to your computer with a RJ-45 cable.
Connect the power cord to the PWR port and the power source.
A. Check the system LEDs. System LED should blink.
B. Check the WAN and LAN LEDs to assure network connections.
Then open the Web browser (e.g. IE or Netscape) and enter IP address of the router into
the address bar (i.e.http://192.168.1.1). The router will ask for a user name and
password. There is none by default setting, so just leave them empty and press{OK}.
Then the Web Configurator shows up, you can follow the Quick Start Wizard in Basic
Setup Section to configure router quickly.
PWR
1
2
4
3
Power plug
03
1
2
3
4
First, connect the WAN interface to the external ADSL/Cable modem with a
RJ-45 cable.
VIGOROUS BROADBAND ACCESS
LAN