Operation Manual

5-13
Advanced Setup
the 192.168.202.0 network is behind the router.
Network Interface: Specifies the network interface. In the
example, we use LAN2 to connect to the next hop router
192.168.200.253.
Click “OK”.
Note:
For the static route to work, the next hop router must
also have added a static route to forward all
192.168.100.0/24 IP packets to the Vigor2200 router.
After clicking the “OK” button, you will see the added
route is shown in the current running routing table. Click
“View Routing table” to verify.
5.5.2 Clear a Static Route
To clear a static route, set the Status/Action field to Empty/Clear,
as shown below.