Operation Manual

Vigor2133 Series User’s Guide

7/8/9/10 Disable –Click it to disable the configuration of this channel.

General Settings VLAN Tag – Type the value as the VLAN ID number. Valid

settings are in the range from 1 to 4095. The network traffic

flowing on each channel will be identified by the system via

their VLAN Tags. Channels using the same WAN type may not

configure the same VLAN tag value.

Priority – Choose the number to determine the packet

priority for such VLAN. The range is from 0 to 7.

Bridge mode Enable – Click it to enable Bridge mode for such channel.

Physical Members – Group the physical ports by checking the

corresponding check box(es) for applying the bridge

connection.

After finished the above settings, click OK to save the settings.