Operation Manual

Vigor2133 Series User’s Guide
642
123.45.67.89).
ltype It means Link Type.
“ltype=0” means “Disable”.
“ltype=1” means “64kbps”.
“ltype=2” means “128kbps”.
“ltype=3” means “BOD”.
oname It means Dial-Out Username.
“oname=admin” means to set Username = admin.
opwd It means Dial-Out Password
“opwd=1234” means to set Password = 1234.
pauth It means PPP Authentication.
“pauth=pc” means to set PPP Authentication = PAP&CHAP.
“pauth=p” means to set PPP Authentication = PAP Only
ovj It means VJ Compression.
“ovj=on/off” means to enable/disable VJ Compression.
okey It means IKE Pre-Shared Key.
“okey=abcd” means to set IKE Pre-Shared Key = abcd.
ometh It means IPSec Security Method.
“ometh=ah/” means AH.
“ometh=espd/espda/” means ESP DES without/with
Authentication.
“ometh=esp3/esp3a/” means ESP 3DES without/with
Authentication.
“ometh=espa/espaa” means ESP AES without/with Authentication.
sch It means Index(1-15) in Schedule Setup.
sch=1,3,5,7 Set schedule 1->3->5->7
rcallb It means Require Remote to Callback.
“rcallb=on/off” means to enable/disable Set Require Remote to
Callback.
ikeid It means IKE Local ID.
“ikeid=vigor” means Set Local ID = vigor.
For Dial-In Settings
itype It means Allowed Dial-In Type. Available settings include:
“itype=t” means PPTP.
“itype=s” means IPSec.
“itype=L1”means L2TP (None).
“itype=L1” means L2TP(Nice to Have).
“itype=l2” means L2TP(Must).
peer It means specify Peer VPN Server IP for Remote VPN Gateway.
Type “203.12.23.48” means to allow VPN dial-in with IP address of
203.12.23.48.
Type “off” means any remote IP is allowed to dial in.
peerid It means the peer ID for Remote VPN Gateway.
Type “draytek” means the word is used as local ID.
iname It means Dial-in Username.
“iname=admin” means to set username as “admin”.
ipwd It means Dial-in Password.
“ipwd=1234” means to set password as “1234”.
ivj It means VJ Compression.