Operation Manual

Vigor2133 Series User’s Guide
63
7
vpn dinset <list index> dintype <Type> <on/off>
vpn dinset <list index> subnet <0~4>
vpn dinset <list index> assignip <on/off>
vpn dinset <list index> srnode <on/off>
vpn dinset <list index> remoteip <Remote_Client_IP_Address>
vpn dinset <list index> peer <Peer_ID>
vpn dinset <list index> naming <pass/block>
vpn dinset <list index> multicastvpn <pass/block>
vpn dinset <list index> prekey <on/off>
vpn dinset <list index> assignkey <Pre_Shared_Key>
vpn dinset <list index> digsig <on/off>
vpn dinset <list index> ipsec <Method> <on/off>
vpn dinset <list index> localid <Local_ID>
S
S
y
y
n
n
t
t
a
a
x
x
D
D
e
e
s
s
c
c
r
r
i
i
p
p
t
t
i
i
o
o
n
n
Parameter Description
<list index> It means the index number of the profile.
<on/off> It means to enable or disable the profile.
on – Enable.
off – Disable.
motp <on/off> It means to enable or disable the authentication with mOTP
function.
on – Enable.
off – Disable.
pin_secret<pin> <secret> It means to set PIN code with secret.
<pin> - Type the code for authentication (e.g, 1234).
<secret> - Use the 32 digit-secret number generated by mOTP in the
mobile phone (e.g., e759bb6f0e94c7ab4fe6)
timeout <0~9999> It means to set the time out for dial-in VPN profile. The default is
300 seconds.
username It means to set a username for dial-in VPN profile.
password It means to set the password for dial-in VPN profile.
dintype <Type> <on/off> It means to set dial-in type for creating VPN connection.
<Type>- 0:PPTP,1:IPsec Tunnel,2:L2TP with IPsec Policy,3:SSL Tunnel
<on/off> - on – Enable; off - Disable
subnet <0~4> It means to set the LAN subnet for the VPN profile.
0:LAN1
1:LAN2
2:LAN3
3:LAN4
4:DMZ
assignip <on/off> It means to enable the assignment for static IP address.
on: enable
off: disable.
smdoe <on/off> It means to enable the function of Specify Remote Node.
on: enable