Operation Manual

Vigor2133 Series User’s Guide
334
Manager Host IP (IPv6) Set one host as the manager to execute SNMP function.
Please type in IPv6 address to specify certain host.
Trap Community Set trap community by typing a proper name. The default
setting is public.
The maximum length of the text is limited to 23 characters.
Notification Host IP (IPv4) Set the IPv4 address of the host that will receive the trap
community.
Notification Host IP (IPv6) Set the IPv6 address of the host that will receive the trap
community.
Trap Timeout The default setting is 10 seconds.
Enable SNMPV3 Agent Check it to enable this function.
USM User USM means user-based security mode.
Type a username which will be used for authentication. The
maximum length of the text is limited to 23 characters.
Auth Algorithm Choose one of the encryption methods listed below as the
authentication algorithm.
Auth Password Type a password for authentication. The maximum length of
the text is limited to 23 characters.
Privacy Algorithm Choose one of the methods listed below as the privacy
algorithm.
Privacy Password Type a password for privacy. The maximum length of the
text is limited to 23 characters.
Click OK to save these settings.