Operation Manual

Vigor2133 Series User’s Guide
260
Action Display the packets to be passed /blocked.
CSM Display the content security managed
Move Up/Down Use Up or Down link to move the order of the filter rules.
Next Filter Set Set the link to the next filter set to be executed after the
current filter run. Do not make a loop with many filter sets.
Wizard Mode Allow to configure frequently used settings for filter rule via
several setting pages.
Advance Mode Allow to configure detailed settings of filter rule.
To use Wizard Mode, simple do the following steps:
1. Click the Wizard Mode radio button.
2. Click Index 1. The setting page will appear as follows:
Available settings are explained as follows:
Item Description
Comments Enter filter set comments/description. Maximum length is
14- character long.
Direction Set the direction of packet flow. It is for Data Filter only.
For the Call Filter, this setting is not available since Call
Filter is only applied to outgoing traffic.
Note: RT means routing domain for 2nd subnet or other
LAN.