Operation Manual

Vigor2133 Series User’s Guide

check SSID 1 and SSID 2.

MAC Address Filter Display all MAC addresses that are edited before.

Client’s MAC Address Manually enter the MAC address of wireless client.

Apply SSID After entering the client’s MAC address, check the box of the

SSIDs desired to insert this MAC address into their access

control list.

Attribute s: Isolate the station from LAN - select to isolate the

wireless connection of the wireless client of the MAC address

from LAN.

Add Add a new MAC address into the list.

Delete Delete the selected MAC address in the list.

Edit Edit the selected MAC address in the list.

Cancel Give up the access control set up.

OK Click it to save the access control list.

Clear All Clean all entries in the MAC address list.

Backup Access Control Settings on this web page can be saved as a file which can be

restored in the future by this device or other device.

Upload From File Restore wireless access control settings and applied onto this

device.

After finishing all the settings here, please click OK to save the configuration.

Below shows Wireless LAN>>WPS web page:

Available settings are explained as follows:

Item Description

Enable WPS Check this box to enable WPS setting.

WPS Status Display related system information for WPS. If the wireless

security (encryption) function of the router is properly