Operation Manual

Vigor2133 Series User’s Guide

166

(

)

This function is used for “n”/ “ac” models only.

Over recent years, the market for wireless communications has enjoyed tremendous growth.

Wireless technology now reaches or is capable of reaching virtually every location on the

surface of the earth. Hundreds of millions of people exchange information every day via

wireless communication products. The Vigor2133 wireless series router (with “n”, or “ac” in

model name) is designed for maximum flexibility and efficiency of a small office/home. Any

authorized staff can bring a built-in WLAN client PDA or notebook into a meeting room for

conference without laying a clot of LAN cable or drilling holes everywhere. Wireless LAN

enables high mobility so WLAN users can simultaneously access all LAN facilities just like on a

wired LAN as well as Internet access.

The Vigor wireless routers are equipped with a wireless LAN interface compliant with the

standard IEEE 802.11n draft 2 protocol. To boost its performance further, the Vigor Router is

also loaded with advanced wireless technology to lift up data rate up to 300 Mbps*. Hence,

you can finally smoothly enjoy stream music and video.

Vigor2133 wireless router is a highly integrated wireless local area network (WLAN) for 5 GHz

802.11ac or 2.4/5 GHz 802.11n WLAN applications. It supports channel operations of 20/40

MHz at 2.4 GHz and 20/40/80 MHz at 5 GHz. Vigor2133 “ac” series router can support data

rates up to 1.3 Gbps in 802.11ac 80 MHz channels. Vigor2133 “n” series router supports

802.11n up to 300 Mbps for 40 MHz channel operations.

Info

The actual data throughput will vary according to the network conditions

and environmental factors, including volume of network traffic, network

overhead and building materials.

In an Infrastructure Mode of wireless network, Vigor wireless router plays a role as an Access

Point (AP) connecting to lots of wireless clients or Stations (STA). All the STAs will share the

same Internet connection via Vigor wireless router. The General Settings will set up the

information of this wireless network, including its SSID as identification, located channel etc.