Quick Start Guide

Vigor2132 Series Quick Start Guide
5
1
1
.
.
1
1
.
.
2
2
V
V
i
i
g
g
o
o
r
r
2
2
1
1
3
3
2
2
a
a
c
c
/
/
V
V
a
a
c
c
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT (Activity)
Off The router is powered off.
On USB device is connected and ready for use.USB1~USB2
Blinking The data is transmitting.
On Internet connection is ready.
Off Internet connection is not ready.
WAN
Blinking The data is transmitting.
On Wireless access point with bandwidth of
2.4GHz/5GHz is ready.
2.4G/5G
Blinking It will blink slowly while wireless traffic
goes through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and
will return to normal condition after two
minutes. (You need to setup WPS within 2
minutes.)
CSM
On The profile(s) of CSM (Content Security
Management) for IM/P2P, URL/Web
Content Filter application can be enabled
from Firewall >>General Setup. (Such
profile must be established under CSM
menu).
On The DoS function is active. DoS
Blinking It will blink while detecting an attack.
QoS
On The QoS function is active.
On The phone connected to this port is
off-hook.
Phone1 ~
Phone2
Off The phone connected to this port is