Operation Manual

Vigor2132 Series User’s Guide
190
6. To route the packets coming from the Firewall Router back to the remote router, access
into the web user interface of the Firewall Router. Then, set “192.168.1.1/24” as the
gateway IP address and set “172.16.3.0/24” as the destination IP address.
Example 2:
Below shows a scenario that local users behind Vigor router A want to access into a remote
service (e.g., YouTube) which is blocked or restricted by local Service Provider in area with
restrictions. A policy route can be created by the side of Router A to break through the Internet
censorship circumvention.
A VPN tunnel has been established between Router A and router B.
1. Access into the web user interface of Router A.
2. Open Route Policy.
3. Click any index number (e.g., #1 in this case).
4. In the following web page, check Enable; type “192.168.1.10” as Src IP Range; type
“213.57.89.100” as the Destination IP for the remote VPN server; and choose VPN as
the Interface setting.