Operation Manual

Vigor2132 Series User’s Guide
6
Interface Description
Wireless LAN
ON/OFF/WPS
Press the button and release it within 2 seconds. When the wireless
function is ready, the green LED will be on.
Press the button and release it within 2 seconds to turn off the WLAN
function. When the wireless function is not ready, the LED will be off.
When WPS function is enabled by web user interface, press this button
for more than 2 seconds to wait for client’s device making
network
connection through WPS.
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
USB1~USB2 Connecter for a USB device.
WAN Connecter for local network devices or modem for accessing Internet.
LAN1~LAN4 Connecters for local network devices.
Phone1~ Phone2 Connecter for analog phone(s).
PWR Connecter for a power adapter.
ON/OFF Power Switch.