User`s guide

Vigor2130 Series User’s Guide
37
After finishing all the settings here, please click OK to activate them.
P
P
P
P
T
T
P
P
/
/
L
L
2
2
T
T
P
P
To use PPTP/L2TP as the accessing protocol of the internet, please choose PPTP/L2TP from
Connection Type drop down menu. The following web page will be shown.
Username Type in the username provided by ISP in this field.
Password Type in the password provided by ISP in this field.
Server Address Type in the IP address for PPTP /L2TP server.
WAN IP Network Settings You can choose Static IP or DHCP as WAN IP network setting.
IP Address Type the IP address if you choose Static IP as the WAN IP
network setting.
Subnet Mask Type the subnet mask if you chose Static IP as the WAN IP.
Primary DNS Server If you choose Static IP for WAN IP Network Settings, you
must specify a DNS server IP address here because your ISP
should provide you with usually more than one DNS Server. If
your ISP does not provide it, the router will apply a default
DNS Server automatically.
Secondary DNS Server If you choose Static IP for WAN IP Network Settings, you can
specify secondary DNS server IP address here because your ISP
often provides you more than one DNS Server. If your ISP does
not provide it, the router will apply a default secondary DNS
Server automatically.