Manualshelf

User`s guide

ManualsBrandsDraytek ManualscomputerVIGOR 2130
201202203204205206207208209210
Vigor2130 Series User’s Guide
202
CPU Usage Display the percentage of the CPU usage of your system.
Memory Usage Display the size of the memory usage and the percentage.
LAN-------
MAC Address Display the MAC address of the LAN Interface.
IP Address Display the IP address of the LAN interface.
IP Mask Display the subnet mask address of the LAN interface.
IPv6 Address (Global) Display the global IPv6 address of the LAN interface.
IPv6 Address (Link) Display the link local IPv6 address of the LAN interface.
DHCP Server Display if the DHCP server is active or not.
WAN-------
Connection Mode Display current connection type used.
Link Status Display the connection status.
MAC Address Display the MAC address of the WAN Interface.
IP Address Display the IP address of the WAN interface.
IP Mask Display the subnet mask address of the WAN interface.
IPv6 Address (Link) Display the IPv6 address of the WAN interface.
Default Gateway Display the gateway address of the WAN interface.
Primary DNS Display the specified primary DNS setting.
Secondary DNS Display the specified secondary DNS setting.
Wireless LAN-------
MAC Address Display the MAC address of the wireless LAN.
Device Type Display the device type used for wireless LAN.
SSID Display the SSID of the router.
Channel Display the channel that wireless LAN used.
Manufacturer Display the manufacturer of the disk.
Model Display the model of the disk.
Size Display the storage size of the USB diskette.
Status Display current status of the USB diskette.
4
4
.
.
1
1
2
2
.
.
2
2
T
T
R
R
-
-
0
0
6
6
9
9
Vigor router with TR-069 is available for matching with VigorACS server. Such page
provides VigorACS and CPE settings under TR-069 protocol. All the settings configured here
is for CPE to be controlled and managed with VigorACS server. Users need to type URL,
username and password for the VigorACS server that such device will be connected. However
URL, username and password under CPE client are fixed that users cannot change it. The
default CPE username and password are "vigor" and "password". You will need it when you
configure VigorACS server.