User`s guide

Vigor2130 Series User’s Guide
167
4
4
.
.
7
7
.
.
1
1
R
R
e
e
m
m
o
o
t
t
e
e
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
Enable the necessary VPN service as you need. If you intend to run a VPN server inside your
LAN, you should enable IPSec VPN Pass-through and specify an IP address to allow VPN
tunnel pass through.
Enable IPSec VPN Service
If this checkbox is checked, the system firewall will allow
VPN (IPSec) remote access from WAN side to the router.
Enable IPSec VPN
Pass-through (Server inside
your LAN)
If this checkbox is checked, the system firewall will allow
VPN (IPSec) remote access from WAN side to a VPN
device on the LAN. Type the IP address of the VPN
device in the field next to the checkbox.
Enable PPTP VPN Service
If this checkbox is checked, the system firewall will allow
VPN (PPTP) remote access from WAN side to the router.
IP Address range for PPTP client – Specify an IP
address pool for the local private network that will be
assigned to PPTP clients. Note the values given here
should not be the same as IP address range for DHCP
Client.
IP Address range for DHCP client – Display the range
of IP address assigned by DHCP server.
Enable PPTP VPN
Pass-through (Server inside
your LAN)
If this checkbox is checked, the system firewall will pass
VPN (PPTP) remote access from WAN side to a VPN
server in the LAN. Type the IP address of the VPN server
in the field next to the checkbox.