User`s guide

Vigor2130 Series User’s Guide
6
1
1
.
.
2
2
.
.
3
3
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
1
1
3
3
0
0
V
V
n
n
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity)
Off The router is powered off.
On Hardware NAT is enabled. HPA
Off Hardware NAT is disabled.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
WAN
Blinking It will blink while transmitting data.
On (Orange) The port is connected with 100Mbps.
On (Green) The port is connected with 1000Mbps.
Off The port is disconnected.
LAN
1/2/3/4
Blinking The data is transmitting.
On A USB device is connected and active. USB1/2
Blinking The data is transmitting.
On The phone connected to this port is
off-hook.
Off The phone connected to this port is
on-hook.
Phone1/
Phone2
Blinking A phone call comes.
On Wireless access point is ready. WLAN
Blinking It will blink while wireless traffic goes
through.
On Press this button for 2 seconds to wait
for client device making network
connection through WPS. When the
LED lights up, the WPS connection will
be on.
Off The WPS is off.
WPS
Button
Blinking Waiting for wireless client sending
requests for connection about two
minutes.
Interface Description
WLAN
Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
WAN Connector for accessing the Internet.
LAN
(1/2/3/4)
Connectors for local networked devices.
USB (1/2) Connector for USB storage (Pen Driver/Mobile HD) or
printer.