User`s guide

Vigor2130 Series User’s Guide
101
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSServ
let
Username/Password - Type username and password for
ACS Server for authentication. For example, if you want
to use such CPE with VigorACS, you can type as the
following:
Username: acs
Password: password
CPE Settings
Such information is useful for Auto Configuration
Server.
Enable/Disable – Allow/Deny the CPE Client to
connect with Auto Configuration Server.
Port – Sometimes, port conflict might be occurred.
To solve such problem, you might change port
number for CPE.
Periodic Inform Settings
Disable – The system will not send inform message to
ACS server.
Enable – The system will send inform message to ACS
server periodically (with the time set in the box of
interval time).
The default setting is Enable. Please set interval time or
schedule time for the router to send notification to CPE.
Or click Disable to close the mechanism of notification.
3
3
.
.
1
1
0
0
.
.
3
3
U
U
s
s
e
e
r
r
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
This page allows you to set new password for user operation.
Old Password Type in the old password. The factory default setting for
password is blank.
New Password Type in new password in this filed.
Confirm New Password Type in the new password again.
When you click OK, the login window will appear. Please use the new password to access
into the web configurator again.