Operation Manual

Vigor2120 Series User’s Guide
40
Available settings are explained as follows:
Item Description
SSID
The identification of the Wireless AP.
MAC Address
(Optional)
The MAC Address of the Wireless AP.
Channel
The channel of frequency of the Wireless AP. Please notice
that, if this setting is modified, the channel of Wireless LAN
(2.4GHz) would be also modified.
Security Mode
The mode to connect to the Wireless AP.
 Disable – The Router connects to the wireless AP
without any encryption mechanism.
 WEP – The Router connects to the wireless AP as a
WEP client and the encryption key should be entered in
WEP Key.
 WPA/PSK – The Router connects to the wireless AP as
a WPA client and the encryption key should be entered
in PSK.
 WPA2/PSK – The Router connects to the wireless AP
as a WPA2 client and the encryption key should be
entered in PSK.
Back
Click it to return to previous setting page.
Next
Click it to get into the next setting page.
Cancel
Click it to give up the quick start wizard.
6. Click the AP Discovery button to choose your Wireless AP. You can also set the
Wireless AP information directly and skip the next 2 steps.