Operation Manual

Vigor2110F Series User’s Guide
225
4
4
.
.
1
1
4
4
.
.
5
5
S
S
y
y
s
s
l
l
o
o
g
g
/
/
M
M
a
a
i
i
l
l
A
A
l
l
e
e
r
r
t
t
SysLog function is provided for users to monitor router. There is no bother to directly get into
the Web Configurator of the router or borrow debug equipments.
Enable (Syslog Access…) Check “Enable” to activate function of syslog.
Syslog Server IP The IP address of the Syslog server.
Destination Port Assign a port for the Syslog protocol.
Enable syslog message Check the box listed on this web page to send the
corresponding message of firewall, VPN, User Access,
Call, WAN, Router/DSL information to Syslog.
Enable (Alert Setup…) Check “Enable” to activate function of mail alert.
Send a test e-mail Make a simple test for the e-mail address specified in this
page. Please assign the mail address first and click this
button to execute a test for verify the mail address is
available or not.
SMTP Server The IP address of the SMTP server.
Mail To Assign a mail address for sending mails out.
Return-Path Assign a path for receiving the mail from outside.
Authentication Check this box to activate this function while using e-mail
application.
User Name Type the user name for authentication.
Password Type the password for authentication.
Enable E-mail Alert Check the box to send alert message to the e-mail box
while the router detecting the item(s) you specify here.
Click OK to save these settings.
For viewing the Syslog, please do the following:
1. Just set your monitor PC’s IP address in the field of Server IP Address