Operation Manual

Vigor2110F Series User’s Guide
6
1
1
.
.
2
2
.
.
3
3
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
1
1
1
1
0
0
F
F
n
n
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity)
Off The router is powered off.
On Wireless access point is ready. WLAN
Blinking It will blink while wireless traffic goes
through.
On The WAN port is connected. WAN
Blinking It will blink while transmitting data.
On The port is connected.
Off The port is disconnected.
LAN 1/2/3/4
Blinking The data is transmitting.
On A USB device is connected and active. USB
Blinking The data is transmitting.
VPN On The VPN tunnel is active.
QoS
On The QoS function is active.
On The DoS/DDoS function is active. DoS
Blinking It will blink while detecting an attack.
On The WPS is on.
Off The WPS is off.
WPS
Blinking Waiting for wireless client sending requests
for connection about two minutes.
On Press this button for 2 seconds to wait for
client device making network connection
through WPS. When the LED lights up, the
WPS connection will be on.
Off The WPS is off.
WPS Button
Blinking Waiting for wireless client sending requests
for connection about two minutes.
Interface Description
WLAN
Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
WAN Connector for accessing the Internet.
LAN (1-4) Connectors for local networked devices.
USB Connector for USB storage (Pen Driver/Mobile HD) or
printer.