Operation Manual

Vigor2110F Series User’s Guide
4
1
1
.
.
2
2
.
.
2
2
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
1
1
1
1
0
0
F
F
V
V
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT
(Activity)
Off The router is powered off.
CSM On The profile(s) of CSM (Content Security
Management) for IM/P2P, URL/Web
Content Filter application can be enabled
from Firewall >>General Setup. (Such
profile must be established under CSM
menu).
On The WAN port is connected. WAN
Blinking It will blink while transmitting data.
On The port is connected.
Off The port is disconnected.
LAN 1/2/3/4
Blinking The data is transmitting.
On A USB device is connected and active. USB
Blinking The data is transmitting.
On The phone connected to this port is off-hook.
Off The phone connected to this port is on-hook.
Phone1/
Phone2
Blinking A phone call comes.
On A PSTN phone call comes (in and out).
However, when the phone call is
disconnected, the LED will be off about six
seconds later.
Line
Off There is no PSTN phone call.
WCF On The profile(s) of CSM (Content Security
Management) for Web Content Filter
application can be enabled from Firewall
>>General Setup. (Such profile must be
established under CSM menu)
On The WPS is on.
Off The WPS is off.
WPS
Blinking Waiting for wireless client sending requests
for connection about two minutes.
On Press this button for 2 seconds to wait for
client device making network connection
through WPS. When the LED lights up, the
WPS connection will be on.
Off The WPS is off.
WPS Button
Blinking Waiting for wireless client sending requests
for connection about two minutes.
Interface Description
WAN Connector for accessing the Internet.
LAN (1-4) Connectors for local networked devices.
USB Connector for USB storage (Pen Driver/Mobile HD) or
printer.