User`s guide

Vigor2110 Series User’s Guide
182
Profile Name Specify a name for the profile of the LAN-to-LAN connection.
Enable this profile Check here to activate this profile.
Netbios Naming Packet Pass – click it to have an inquiry for data transmission between
the hosts located on both sides of VPN Tunnel while connecting.
Block – When there is conflict occurred between the hosts on
both sides of VPN Tunnel in connecting, such function can
block data transmission of Netbios Naming Packet inside the
tunnel.
Multicast via VPN Some programs might send multicast packets via VPN
connection.
Pass – Click this button to let multicast packets pass through
the router.
Block – This is default setting. Click this button to let multicast
packets be blocked by the router.
Call Direction Specify the allowed call direction of this LAN-to-LAN profile.
Both:-initiator/responder
Dial-Out- initiator only
Dial-In- responder only.
Always On or Idle Timeout Always On-Check to enable router always keep VPN
connection.
Idle Timeout: The default value is 300 seconds. If the